-Stimulate the given circuit using the software(circuit maker).
-Construct the given circuit using the equipments provided in the laboratory.
-Compare the results with the stimulation values.
-Try to find out the problems and obstacles during the testing and try to solve it.
Place:
Laboratory 2nd year for Electric and Electrical ( Faculty Engineering and Building Environment)
Date:
1 Oktober 2009
Time: 10.30am-12.30pm
2.30pm-5pm
Task leader:
Chong Kim Soon
Assistant:
Yii Wen Wen
Working flow process:
First, we construct the given circuit using the circuit maker to obtain the theoretical values. However, we unsuccessful to stimulate the circuit because the relay part cannot operate in normal way. It take quite long time for us to find the problems and we decided to do hardware first then will settle the stimulation part after that.
We construct the hardware of the circuit and testing using the equipments IDL and testing. LED which as an output is observed for its brightness. If LED is on with the colour lamp then the circuit is considered successful.
Getting the actual value of the component .
This picture which show all the equipment that we used.
Construct the circuit on the breadboard.
Finally, we make the hardware successfully been constructed. We troubleshooting the circuit and the stimulation part in order to solve the problems we obtained.
*What an tiring day!! But the lucky is we manage to get the output LED to light up. And about the stimulation part and the soldering work, left it for next day’s worries.
The earth will still going on even though you face some obstacles in your life~
The only way to manage the obstacles well is to having an optimistic mind~
Hopefully the lucky star will bless us all with its special power *^^*
No comments:
Post a Comment